| Description： |
● Exclusive Thermo-Split: Vapor Phase Control for optimum sensitivity
● Easy to use interfaces, automated system diagnostics and context sensitive help features. One touch of the help button provides detailed instruction increasing productivity with less training.
● A single multi-flow, nebulizer for use with micro-bore to semi-preparative flow rates. No lost time changing nebulizers when your method changes.
● Unlike others, the chemical resistant multi-flow nebulizer is fully warranted, saving you money!
● Very low detector volume resulting in the smallest peak widths, ~3 sec, of any ELS Detector to match the speed requirements of today’s fast LC.
● Long-life lasers with a continually monitored output for stable detection without costly lamp replacements.
● The industries lowest purchase price. SofTAs state of the art technology provides ELS detectors with the best performance at the lowest cost.
Most advanced and Lightest
The Model 200S can meet the requirements of many laboratories looking to add ELS detection technology for the first time. This easy to use detector can accommodate solvents with higher boiling points by selecting higher drift tube and Thermo-Split chamber temperatures.
Specifications
|
Model 200s |
|
Dimensions |
9.8” W x 18” D x 11.5” H |
|
Weigh |
23 lbs |
|
Display |
2 Line x 20 Character per line VFD |
|
User Interface |
Two multi-function buttons |
|
Evaporative Zone Temperature |
Ambient to 120°C |
|
Thermo-Split™ Chamber Temperature |
Ambient to 70°C |
|
Liquid Flow Rate |
0.2--5mL/min(Normal HPLC) ,50--150ul/min(Mini-dia HPLC) |
|
Gas Requirements |
60 - 80 psi Nitrogen or other inert gas |
|
Gas Consumption |
~ 2.5 SLPM |
|
Operating Conditions |
Intended for indoor use only, 60°F to 85°F and <90% R.H. non condensing |
|
Electrical Requirements |
Nominal 120 VAC, 50/60 Hz or Nominal 240 VAC, 50/60 Hz; 600 watts |
|
Wetted Materials |
Stainless steel, glass, anodized aluminum, Teflon™ |
|
Light Source |
650 nm Laser Diode, <5mW |
|
Detector |
Hermetically sealed photo-diode/operational amplifier |
|
Output Signal |
Normal: 1V, Not Normal: Setted by the Users |
|
Interface |
RS232, Contact Closure |
|
